| |
 |
| TABOR 12K |
A GREAT ENTRY-LEVEL TRUCK WINCH
For heavier trucks that need occasional help, the Tabor 12k features a 12V Series Wound
motor, a low-profile freespooling actuator, 3-stage planetary geartrain and 80ft of wire rope.
Power for when you need it most.
|
| TABOR 12 SPECS |
| Part Number: 812000 |
| Rated Line Pull: 12,000 lbs. (5440 kgs) single-line |
| Intended Use/Application: Vehicle Recovery / For Trucks and SUVs |
Duty Cycle Rating:  |
| Motor: Series Wound |
| Remote Control: Remote switch, 12' (3.7m) lead |
| Geartrain: 3-Stage Planetary |
| Gear ratio: 261:1 |
| Clutch (freespooling): Sliding Ring Gear |
| Brake: Automatic Direct Drive Cone |
| Drum diameter/Length: 2.5"/9.0" (6.4cm/23cm) |
| Weight: 89 lbs. (36.3kgs.) |
| Wire rope: 80', 3/8"diameter (24m, 9.5mm diam.) |
| Fairlead: Roller |
| Recommended Battery: 650 CCA minimum for winching |
| Battery leads: 2 gauge, 72" (1.83m) |
| Finish: Powder Coat |
|
| 12V DC PERFORMANCE SPECS |
Line Pull
Lbs.(Kgs.) |
Line Speed
FT./min(M/min.) |
Motor
Current |
Pull by layer
layer/Lbs(Kgs.) |
| 0 |
24.4 (7.44) |
73 amps |
1/12,000 (5440) |
| 2000 (910) |
12.6 (3.84) |
168 amps |
2/9517 (4317) |
| 4000 (1810) |
9.2 (2.80) |
245 amps |
3/7886 (3577) |
| 6000 (2720) |
6.7 (2.04) |
328 amps |
4/6732 (3054) |
| 8000 (3630) |
4.9 (1.49) |
405 amps |
|
| 9500 (4310) |
3.8 (1.16) |
479 amps |
|
| 12000 (5440) |
3.3 (1.00) |
549 amps |
|
|
| |
| Above performance specs are based on first layer of drum |
|
| Winch Dimensions: 20.8" L. x 6.3" D. x 6.4" H. (528mm L. x 160mm D. x 182mm H.) |
| Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm) |
|
|
|
Replacement Parts 