| Jeep, Truck & SUV Winches: M8000 |
| |
 |
WARN M8000
Compact, tough and reliable |
The M8000 winch has
been trusted by off-roaders
for over twenty years. This 8,000 lb. capacity winch
offers outstanding reliability
and value. Its low-profile
design allows for a variety
of mounting options, making
it perfect for most trucks,
Jeeps and SUVs.
- Premium Series winch that delivers classic design, proven performance,
and legendary WARN reliability
- New, next generation electrical control box and hand-held remote control
- Low-profile design and separate control box allows for a wide range of
mounting options
- Exclusive brake design provides superior control while winching
- Durable 3-stage planetary geartrain for smooth, reliable, operation
- Series-wound, high-speed motor provides fast line speed and strong
pulls
- Chip-resistant powder-coated finish
- 100' of steel or synthetic rope
|
| M8000 SPECS/PART NUMBERS |
| Winch model: M8000 |
| Part numbers: 26502 (wire rope, 12V), 88502 (wire rope, 12V, CE, International sales only), 265032 (wire rope, 24V) |
| Rated line pull: 8,000 lbs., (3630 kgs.) single-line |
| Motor: Series Wound, 12V 4.8 hp, 24V 2.1 hp, |
| Electrical controls: Contactor |
| Remote Control: Remote switch, 12' (3.7m) lead |
| Geartrain: 3-Stage Planetary |
| Gear ratio: 216:1 |
| Clutch (freespooling): Sliding ring gear |
| Brake: Automatic direct drive cone |
| Drum diameter/Length: 2.5"/9.0" (6.4cm/23cm) |
| Weight: 74 lbs. (34 kgs) |
| Rope: Steel -- 100', 5/16" diam. |
| Fairlead: Roller |
| Recommended Battery: 650 CCA minimum for winching |
| Battery leads: 2 gauge, 72" (1.83m) |
| Finish: Argent gray powder coat |
|
| 12V DC PERFORMANCE SPECS |
Line Pull
Lbs.(Kgs.) |
Line Speed
FT./min(M/min.) |
Motor
Current |
Pull by layer
layer/Lbs(Kgs.) |
| 0 |
42(12.8) |
80 amps |
1/8000(3629) |
| 2000(910) |
16(4.88) |
200 amps |
2/7280(3302) |
| 4000(1810) |
11.9(3.63) |
285 amps |
3/6670(3026) |
| 6000(2720) |
9.79(2.98) |
350 amps |
4/6230(2826) |
| 8000(3630) |
8.01(2.44) |
435 amps |
|
|
| 24V DC PERFORMANCE SPECS |
Line Pull
Lbs.(Kgs.) |
Line Speed
FT./min(M/min.) |
Motor
Current |
Pull by layer
layer/Lbs(Kgs.) |
| 0 |
27.3 (8.32) |
46 amps |
1/8000 (3629) |
| 2000 (910) |
17.1 (5.21) |
99 amps |
2/7460 (3384) |
| 4000 (1810) |
12.6 (3.84) |
145 amps |
3/6980 (3166) |
| 6000 (2720) |
10.3 (3.14) |
190 amps |
4/6620 (3003) |
| 8000 (3630) |
8.8 (2.68) |
235 amps |
|
|
| |
| Above performance specs are based on first layer of drum |
|
Winch Dimensions: 21.04" L. x 6.3" D. x 7.6" H.
(534mm L. x 160m D. x 193mm H.) |
| Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm) |
|
|
|
Replacement Parts 
M8000 Operator's Manual
