| Jeep, Truck & SUV Winches: 9.5cti Multi-Mount |
| |
 |
NEW! WARN 9.5cti Multi-Mount
Newest addition to the WARN winch lineup |
Contactor equipped, thermometric winch is the newest addition to the
WARN Ultimate Performance winch lineup. A massive protective structure combined
with sophisticated operator feedback delivers fast line speeds, and long duty cycles.
- Massive protective structure combined with sophisticated operator feedback
- New contactor control features exceptional durability, extra long life, and superior weather sealing
- Series Wound motor and 3-stage planetary gear train deliver 9,500 lbs. of pulling capacity,
fast line speeds, and long duty cycles
- Extreme duty winch sealing system
- Motor-mounted thermal sensor relays temperature information to winch operator by way of the
hand-held remote control with LED indicator
- Redesigned remote control stands up to rough treatment off-road. Rubberized, ergonomic pistol-grip handle.
Remote is ultra weather/mud resistant thanks to improved sealing. Simple, intuitive operation
- High gloss, chip-resistant black powder coat finish over a massive cast-aluminum alloy housing
- Includes 9.5cti winch, multi-mount carrier, and quick connect wiring for front of vehicle.
Winch comes with 125 ft. of 5/16" wire rope, hook, remote control on 12' lead, and hawse fairlead
|
| 9.5cti MULTI-MOUNT SPECS |
| Part number: PN 85760 |
| Part Number: PN 85757 (for the H2 Hummer) |
| Rated line pull: 9,500 lbs., (4310 kgs.) single-line |
| Motor: Series Wound |
| Electrical controls: Contactor |
| Remote Control: Remote switch, LED indicator, 12' (3.7m) lead |
| Geartrain: 3-Stage Planetary |
| Gear ratio: 156:1 |
| Clutch (freespooling): Sliding Ring Gear |
| Brake: Automatic Direct Drive Cone |
| Drum diameter/Length: 2.5"/9.0" (6.4cm/23cm) |
| Wire rope: 125', 5/16"diameter (38m, 8mm diam.) |
| Fairlead: Hawse |
| Finish: High-gloss powder coat over primer undercoating |
| Recommended Battery: 650 CCA minimum for winching |
| Battery leads: 2 gauge, 72" (1.83m) |
|
| 12V DC PERFORMANCE SPECS |
Line Pull
Lbs.(Kgs.) |
Line Speed
FT./min(M/min.) |
Motor
Current |
Pull by layer
layer/Lbs(Kgs.) |
| 0 |
62 (18.9) |
47 amps |
1/9500 (4313) |
| 2000 (910) |
16.3 (4.97) |
160 amps |
2/8650 (3927) |
| 4000 (1810) |
11.8 (3.60) |
230 amps |
3/7920 (3595) |
| 6000 (2720) |
9.31 (2.84) |
305 amps |
4/7400 (3359) |
| 8000 (3630) |
7.59 (2.31) |
370 amps |
5/6940 (3150) |
| 9500 (4310) |
6.67 (2.03) |
425 amps |
|
|
| |
| Above performance specs are based on first layer of drum |
| Winch Dimensions: 23.1" L. x 6.3" D. x 10.4" H. (587mm L. x 160mm D. x 264mm H.) |
|
|
|
9.5cti Operator's Manual
